The toilet bowl ring is a common issue that plagues many people. It can be hard to remove and leaves your toilet looking dull and dirty.
Luckily, we are here to teach you how to remove the toilet bowl ring and seven easy ways to remove it!
A toilet bowl ring is a brown stain that appears around the inside of toilets.
It’s caused by urine seeping down through the porcelain and leaving behind rust marks, which are then revealed when water evaporates.
Removing it can be difficult because you need to scrub hard enough to remove the stain without damaging your toilet bowl.
Here are seven handy tips on how to remove toilet bowl rings easily! which means you can do it yourself! Keep reading to know more information about removing a toilet ring.
What is a toilet bowl ring?
What is a toilet bowl ring and why should you care? A toilet bowl ring is the nasty build-up of hard water, urine, and dirt that forms around the top of the toilet bowl.
A toilet bowl ring is a brownish film that often appears around the edge of a toilet bowl. It’s caused by hard water, calcification, and bacteria.
A toilet bowl ring, or rings, can be seen when the water in your toilet has been sitting for an extended amount of time.
The rings form on the inside of your porcelain toilet because there’s no agitation from running water to break down the particles in the liquid.
In order to prevent these unsightly stains from forming around your potty, make sure that you flush it every few hours and keep it clean!
If you can see the ring in your toilet, then it’s time to replacing. Otherways can make your bathroom look dirty.
Luckily, there are several ways to clean it and prevent it from forming in the first place. which we write it below!
How to Remove Toilet Bowl Ring in 7 Easy Steps!
Removing toilet bowl rings is actually quite easy and there are various methods for doing so. Here we will discuss the 7 effective ways to remove the toilet ring.
However, there are 7 solutions that you can try. But we are going to start the first easy way.
If the first solution doesn’t work then move on to methods two through seven for more efficient results!
1. Scrubbing Brush: Use the Scrubbing Brush to Remove the Toilet Ring.
There are many ways you can try to remove that ring from your toilet bowl. The first thing and probably the most effective method is by using the brush!
To remove that toilet ring and keep your toilet clean, you should scrub the bowl with a scrubbing brush and if necessary, use some water.
Put some elbow grease into it and a lot of effort into it to scrubbing. If the stains are not too severe, you can probably remove most of them by scrubbing.
If you have tried this before and it didn’t work, then you can try the following methods are in below!
2. Baking Soda: Use Baking Soda To remove toilet Bowl ring.
Baking soda is a wonderful natural cleaner, and it’s also cheaper than most other cleaners.
You can solve this problem with just baking soda and water if you don’t want to use chemicals in your toilet yet!
To do that, you have to mix baking soda with enough water to make a thick paste.
After making the paste, apply the paste properly as possible as you can inside the toilet bowl where that ring is present.
Now, you have to wait 15-30 minutes to sit the baking soda on the ring properly.
When the baking soda sits properly, you can start using your scrubbing brush to scrub away the stains.
3.Baking Soda with Vinegar: Use Vinegar with Baking Soda to detach that toilet Bowl ring.
If the baking soda and water slurry can’t detach to remove your ring from the toilet bowl, then you should try a combination of vinegar with baking soda.
With the combination of vinegar with baking soda, you can make a chemical reaction. which is the method of making a lot of oxygen.
To remove stains, oxygenation power is a great way. that’s why oxygenating is used for washing heavily stained clothes in the laundry.
They work really well on a variety of different colors and fabrics without any negative side effects!
So, to remove your toilet ring spread some baking soda all over the toilet inside where that ring is showing and then pour in a jarful of vinegar.
You’ll notice fizzing, what happens there? this mixture reacts with vinegar with baking soda and creates oxygenation power! that’s why you see the fizzing.
Let it go until the fizzing stops. then scrub it away using a brush until that ring moves to go.
4.Toilet Cleaner: To remove the toilet ring use Toilet Cleaner
The next best thing to do if none of the above natural options work is to use regular toilet cleaners.
Bleach is one way to get out stains. Generally, toilet cleaners contain bleach. which means you can use toilet cleaners to remove the toilet ring.
So, apply the toilet cleaner properly where are toilet ring is showing. and wait 5-10 minutes to sit the toilet cleaners.
Now, scrub it with a brush to move out the toilet ring!
5. Using Bleach: to Move Out the Toilet Bowl Ring
Bleach works really well at removing toilet rings caused by bacteria and mold, but it won’t remove those stains caused by hard water.
On the contrary: if used on a toilet with an unfortunate incident of this type (or any other) stain, bleaches can make them even worse!
The recommendation here is that you don’t actually use pure bleach, but rather a cleaner with some form of bleaching agent in it.
In the event that you don’t have any cleaner on hand, then this is always an option. Simply pour some into your toilet bowl and let it sit for a while before scrubbing away at all surfaces with ease.
6. Using a Toilet Pumice Stone
Don’t Think of the pumice stones you use to scrub away dead skin cells from your feet, it’s a softer and flexible stone.
With a softer and flexible stone that can be used in all kinds of cleaning applications.
All you have to do is rub the pumice over stains and see them disappear for a rub as possible as you can.
If that’s not good enough for your stubborn problem areas, try combining any of these above methods together!
7. CLR
CLR is a special product that stands for Calcium, Lime, and Rust. If your toilet’s ring has been caused by rust and nothing else has worked to remove it until now then you might want to consider using CLR as one of the only solutions available.
This stuff will solve your hard water problems in seconds and it is also safe for septic systems.
Plus, the price tag maybe a little more than some people are used to paying but rest assured that this product does what it’s supposed too so there really isn’t any reason not to buy one!
Tips for Avoid Mistakes to Remove the Toilet Bowl Ring
- Do not use bleach, as it can damage your appliances and cause more problems than solved!
- One way to avoid toilet bowl rings is by maintaining your plumbing. Routine ways maintenance and cleaning will help stop the occurrence of these issues in the future, as well!
- To keep your toilet clean, use a regular cleaner chemical. This will prevent any unsightly stains or smells from forming on the porcelain bowl itself!
- When you flush your toilet, do not forget that any leftovers can remain in the bowl. This causes the toilet bowl to ring.
What Causes the Ring in the Toilet Bowl?
That brown ring you see around the water level in your toilet is actually a deposit from when we flush our waste.
The solid particles and chemicals left over after removing all liquid are called “toilet bowl rings,” but don’t worry – they’re not dangerous!
The brown rings that you see in your toilet bowl could be caused by hard water or excessive amounts of iron.
In other words, when the oxygen from air meets with this chemical reaction between two substances (iron and water), it creates rust- which is what causes those pesky patches to form on our sinks!
One of the most common causes for brown rings in your toilet bowl is due to left behind waste.
If you’re not flushing properly, it can easily adhere and create an oily residue on top of porcelain above water level which then leads to these pesky stains!
The brown rings you see around your toilet are not just a cosmetic issue.
They can be caused by mold and bacteria, which build up when toilets stay unused for long periods of time or have rough surfaces that allow them to easily create.
And it can allow mold and fungi to easily take hold. Which is one of the reasons for making the toilet bowl ring.
Tips: Always try to keep your toilet clean and don’t use iron water to flush your toilet. which can help your toilet bowl to keep out the rings.
Conclusion
We hope that after reading the full article, now you know How to Remove Toilet Bowl Ring and how many methods you can do it?
With the above seven methods, you can remove the toilet bowl ring once and for all.
Once it’s gone, make sure to regularly clean your toilet bowl to avoid it building up again.