How Do You Measure the Rough in on a Skirted Toilet?

Skirted toilets have become increasingly popular in recent years due to their sleek and modern appearance. One important factor to consider when installing a skirted toilet is the rough-in measurement.

The rough-in measurement is the distance between the wall and the center of the toilet drain. Properly measuring the rough-in is essential to ensure that the toilet fits correctly and functions properly.

However, measuring the rough-in on a skirted toilet can be a bit more challenging than on a traditional toilet. In this article, we will explore how to measure the rough-in on a skirted toilet, step-by-step, to ensure a successful installation.

Do You Measure the Rough in on a Skirted Toilet?

If you’re considering installing a skirted toilet in your bathroom, it’s important to know how to measure the rough-in distance accurately. The rough-in distance is the distance between the center of the toilet drain and the wall behind the toilet.

Measuring the rough-in correctly is essential to ensure that your toilet fits correctly and functions properly. In this guide, we will walk you through the steps of how to measure the rough-in on a skirted toilet.

1. Gather the Necessary Tools

Before measuring the rough-in on your skirted toilet, gather the necessary tools, including a tape measure, a pencil, and a straight edge or level. You may also want to have a helper to hold the tape measure in place while you take measurements.

2. Locate the

Center of the Drain To locate the center of the toilet drain, remove the skirted panel on the side of the toilet bowl. Use a flashlight to locate the center of the drain. Mark the center of the drain with a pencil.

3. Measure the

Distance from the Center of the Drain to the Wall Using the tape measure, measure the distance from the center of the drain to the wall behind the toilet. Make sure to measure from the center of the drain, not the edge. Take note of the measurement.

4. Double-Check Your Measurements

Measure the distance from the center of the drain to the wall again to double-check your measurements. It’s essential to have accurate measurements to ensure that your toilet fits correctly and functions properly.

5. Determine the Rough-In Distance

The rough-in distance is the distance between the center of the drain and the wall behind the toilet. Round up the measurement to the nearest half-inch to determine the rough-in distance. For example, if the measurement is 12 3/4 inches, round up to 13 inches.

6. Choose the Right Toilet Model

Once you’ve determined the rough-in distance, choose a toilet model that matches the measurement. Skirted toilets typically have rough-in distances of either 10 inches, 12 inches, or 14 inches. Make sure to select a toilet model that matches your rough-in distance to ensure a proper fit.

Also Read: How to Install a Kohler Toilet?

How Do You Measure the Rough in for a Toilet?

Measuring the rough in for a toilet is an important step when installing a new toilet. Rough in refers to the distance from the wall behind your toilet to the center of its waste outlet, and it must be measured accurately if you want your new toilet to fit properly. To measure this distance, use a tape measure and start at one side of the waste pipe opening on the floor.

Measure straight up along that same side until you reach the back wall where your flange will be located. Mark this measurement with a pencil or marker on both sides of the opening so that you can ensure accuracy when measuring again from opposite sides. Then measure across from each mark made and make sure they are even – this is your final measurement for your rough in size!

What Does 12-Inch Rough in Mean?

A 12-inch rough in is a term used to describe the distance between a plumbing fixture, such as a toilet or sink, and the wall behind it. This measurement typically refers to the center of the waste pipe from the finished wall surface. When installing fixtures for new construction or remodeling projects, you must know this measurement so that all necessary lines are connected correctly before walls are closed up.

The standard measurements for residential bathrooms and kitchens generally range from 10 inches to 14 inches with 12-inch being most common. Additionally, when measuring this distance it’s important to keep any drywall off until after installation is complete otherwise you risk having an inaccurate measure. It may also be helpful to note that older homes tend to have smaller rough ins than newer ones do due largely in part because advances in technology allow us better access into tight spaces making these larger pipes possible now.

All in all understanding what a 12 inch rough in means will save time and money by ensuring your fixtures fit properly on their first attempt at installation!

Quick Skirted Toilet Installation: KOHLER ReadyLock

Conclusion

Measuring the rough-in on a skirted toilet is an essential step in the installation process to ensure that your toilet fits correctly and operates properly.

By following the steps outlined in this guide, you can accurately measure the rough-in distance on your skirted toilet and select the appropriate toilet model for your bathroom.

Remember to double-check your measurements and seek the assistance of a professional plumber if you’re unsure or encounter any difficulties during the process.

With proper installation, your skirted toilet will not only look modern and stylish but also function efficiently and reliably for years to come.